Cloud Chasing Guide: 3 Easy Steps for Huge Clouds
Posted by vapecraft on Jul 28th 2026

In short: Want bigger clouds without damaging your MOD? This guide covers three safe methods for boosting vapor production — using a high-VG e-liquid, switching to low-ohm coils, and lowering your nicotine strength.
I’m no psychic, but if you’re reading this, chances are you’re trying to figure out how to get massive clouds without damaging your MOD. If I’m right, which I am, then you’re in luck! What I’m about to explain will blow your mind, not your MOD, and help you to make the biggest clouds you’ve ever seen.
In an attempt to create those sought-after clouds, many vapers turn to a method known as “sub-ohm vaping. ” Sub-ohm vaping is a process that pushes the limits of your battery. When you do this, it can cause the power load to exceed its limitations.
This may cause the device to melt, overheat, or even explode. Sub-ohm vaping is dangerous and should never be attempted, but fear not; I’m going to give you three methods to creating those giant clouds we all know and love, without the risk of explosion.
Method 1: Use a high-VG e-liquid
The first method is purchasing an e-liquid using high percentages of vegetable glycerin (VG). VG captures moisture from the air, creating those monumental vapor plumes. The more VG your e-juice has, the larger the clouds you’ll produce.
The issue with this method is the more VG you use, the more diluted your flavor will become.
Method 2: Use low-ohm coils
The next method is to use low ohm coils. Using a device with lower ohm coils is a quick and easy way to increase your vapor production. Lower ohm coils have less resistance, which causes them to become hotter in less time.
This process will allow the e-liquid to burn faster, producing more vapor output. However, you’ll run through your e-liquid much faster than usual.
Method 3: Lower your nicotine strength
The final method involves reducing your nicotine strength. Many cloud chasers prefer not to use nicotine for this very purpose. Lowering the nicotine level to about 0.
6% can help achieve larger clouds through a process referred to as “direct pulling. ” Direct pulling is the process of inhaling directly from the mouthpiece of the device, allowing higher amounts of vapor to be inhaled. This method is highly effective in achieving larger clouds.
Whether you choose to purchase an e-juice with a high VG percentage, purchase lower ohm coils, reduce your nicotine levels, or even chose to do all three at once, just take into consideration the pros and cons to each method and choose what’s right for you. Before you know it, you’ll be making clouds so large, you’ll have your own atmosphere!
Battery safety comes before cloud size
Every method for producing bigger clouds increases the electrical demand placed on your battery, so safety has to be the starting point rather than an afterthought. Before dropping to a lower resistance, confirm that your batteries are authentic cells from a reputable manufacturer, that their continuous discharge rating (CDR) comfortably exceeds the current your build will draw, and that the wraps and insulating rings are undamaged. A torn wrap can cause a direct short.
Use a quality charger rather than an unknown USB brick, never carry loose cells in a pocket where they can touch keys or coins, and always use batteries in matched pairs in multi-battery devices — same brand, same model, same age, and charged to the same level. Retire any cell that has been dropped hard, gets unusually hot, or no longer holds a charge.
If your device ever becomes hot to the touch, produces a burning or chemical smell, or vents, stop using it immediately and move it somewhere non-flammable. Chasing a bigger cloud is never worth an injury.
Airflow, tank choice, and device setup
Vapor production is not only about coil resistance and juice — airflow is just as important. Cloud-oriented tanks and RDAs use wide-bore drip tips and large adjustable air slots to move a high volume of air across the coil, which carries more vapor and stops the coil from overheating. A restricted airflow setup, of the kind used for mouth-to-lung vaping, will never produce large clouds no matter what juice you run.
Wicking has to keep up as well. High-VG liquid is thick, so a build that produces heavy vapor needs generous wicking channels and cotton that is fluffed rather than packed tight. Under-wicking is the most common cause of dry hits in a high-power setup, and dry hits are both unpleasant and hard on the coil.
Finally, make sure your device can actually deliver the power your build wants. A regulated mod has a maximum wattage and amperage ceiling, and pushing a very low-resistance coil on an underpowered device gives you weak vapor and stresses the electronics.
Technique: how you inhale changes the cloud
Cloud chasing is a direct-to-lung technique. Rather than drawing vapor into your mouth and then inhaling, you pull it straight into your lungs in one long, smooth motion, much like taking a deep breath through a wide straw. A slow, steady draw of a few seconds gives the coil time to saturate the airflow with vapor; a short sharp puff does not.
Priming the coil before you inhale helps too. A couple of short primer puffs bring the coil up to temperature so the main draw starts with a fully heated coil rather than a cold one. On exhale, a slow controlled release produces a denser, more visible cloud than a fast forceful one.
Go gradually. Direct-lung inhaling at high wattage delivers a lot of vapor quickly, so start conservatively and stop if you feel lightheaded, dizzy, or nauseated — all signs you are taking in more nicotine than you are comfortable with. This is exactly why lowering your nicotine strength matters when you move to a high-output setup.
Frequently asked questions
How do I make bigger vapor clouds?
This guide covers three safe methods: use a high-VG e-liquid, switch to low-ohm (sub-ohm) coils, and lower your nicotine strength so you can take bigger, smoother draws.
Why does high-VG e-liquid make bigger clouds?
VG is thicker and denser than PG, so a higher-VG blend produces noticeably more visible vapor, which is why cloud chasers favor high-VG juice.
Do low-ohm coils help with cloud chasing?
Yes. Lower-resistance (sub-ohm) coils heat more e-liquid faster, which produces larger clouds. They require a device and battery capable of handling the extra power safely.
Why lower nicotine strength for cloud chasing?
Bigger clouds mean inhaling more vapor per puff, so a lower nicotine level keeps the throat hit comfortable and helps you avoid taking in too much nicotine.
















