The Hohm Base 4 bay smart charger is a brilliantly designed charger and one of the most advanced vape battery chargers released to date. Each bay within this charger is charged seperately which allows the most accurate possible charge to your battery and the reason that this charger is set well above the rest of the chargers out there is its "Battery Doctor" feature. Basically the gist of this feature is, you insert one of your older batteries and this chargers battery doctor mode will actually enhance your old batteries allowing them to preform longer and better making them almost like new!
Hohm Base 4 Bay Vape Battery Charger
- Compatible with Li-ion / LiFePO4 / Ni-MH / Ni-Cd Batteries
- Each slot/channel is individually controlled by independent Intellichips
- Four-stage charge/discharge algorithm (CC, CV, oscillation, micro-pulse)
- Binomial DV algorithmic technology (pinpoint precision charging)
- Tri-charge allows multiple charge/discharge rates: (0.5A, 1A, and 2A)
- Up to any 2 slots can utilize maximum AMP RATE. Using all 4 slots triggers 4A distribution for efficient input-power distribution
- BCM (Battery Chemistry Multiplier) is preset for simple & safe operation. Charge at 0.5A, discharge at 0.5A. Charge at 1A, discharge at 0.5A. Charge at 2A, discharge at 0.5A. BCSM (Batt Chem. Stress Match) is also 100% automated. It measures, monitors, and elevates any excess stress during oscillation and micro-pulse intervals to retain optimal +/- cycle.
- LCD displays real-time status (charge %, volts, mAh, and cycle time)
- mAh Detector: achieves current-state mAh capacity by using proprietary features of oscillation and micro-pulsing (charge/ discharge). Using this operation achieves real mAh at safe cut-off levels for battery cells
- Battery Doctor: uses amplified oscillation and micro-pulsing current to bring batteries to their utmost AMP & capacity potential
- Two-Tier Battery Bridge System. *Smaller batteries have dedicated groove inside each slot for secure placement
- 0V Auto-Activation feature automatically handles any 0V situation. Put battery in, Hohm BASE will handle the rest
- Overcharge & Overtime Prevention: Automatic safety feature cuts power to battery if the cell were to reach any of the preset volt values, binomial DV algorithm values, or time limitation values
- Buzzer alarm to alert of any irregularity or battery error occurrence
- AUTO maintenance charge if battery voltage drops .02V. *Leave battery in charger for a day or a decade...they will be ready when you are
- 166o STN screen displays each batteries’ real-time status, properties, and condition from nearly any angle. *STN enhanced LCD display
General Device & Battery Warnings
- Products sold on Vape Craft inc. are not intended for use with Efest, MXJO, and/or LG Batteries.
- Vapecraftinc.com will not be held responsible or liable for any injury, damage, or defect, permanent or temporary that may be caused by the improper use of a Li-Ion battery. Please have a basic understanding of the batteries you are using and how to care for them properly.